Winkelwagen0artikelen

Hinge – back release repair kit R107 SL and SLC

SKU: MB-0009109386-RPS-INA-NB-SET

 31,52 incl. VAT ( 26,05 excl. VAT)

6 in stock

Repair part back release hinge – R107
0

Description

Backrest hinge / seat fitting repair kit – Mercedes R107

Click here for >> instructions for mounting R107 chair back

This high-quality repair kit has been developed to repair the seat hardware (backrest adjustment) of the Mercedes R107. A common problem is that the backrest sinks backwards on its own while driving. This is caused by the original friction ring in the seat hardware drying out and crumbling after decades, causing the built-in friction brake to lose its effectiveness.

With this complete repair kit, the original seat hardware can be refurbished so that the backrest remains firmly in the desired position. This avoids the high costs of replacing entire seat hardware sets and allows you to retain the original Mercedes parts.

Suitable for Mercedes models

• Mercedes R107 SL – all models and years

Specifications

  1. Suitable for both the left and right seat.
  2. Complete repair kit for two seats (driver's and passenger's seat).
  3. Restores the friction brake of the seat fitting.
  4. Replaces the worn original friction rings.
  5. Prevents the backrest from sliding backwards on its own.
  6. Preservation of the original Mercedes seat hardware.
  7. Assembly requires technical knowledge.

Contents of the repair kit

  1. 4 × PTFE friction ring 3.0 mm.
  2. 4 × PTFE friction rings 0.5 mm (for eliminating play in seat fittings with an adjustment wheel).
  3. 2 × PTFE friction ring 0.25 mm (for eliminating play in seat fittings without an adjustment wheel).
  4. 8 × M5 × 12 mm bolts including nuts.

Important

For a professional repair, the seats and seat fittings must be completely removed and disassembled. During the overhaul, also check the bearings, bushings, and connecting shaft for wear. If the seat fitting exhibits excessive play, the supplied PTFE shims can be used to eliminate this play and restore the original operation of the mechanism.

Always check before purchase and installation whether the part is suitable and equivalent based on photos, description, and specifications; installed or used parts cannot be returned.

Additional information

Weight 0,055 kg
Dimensions 10 × 5.5 × 1 cm
OEM

00019109386, A00019109386

Brand

RJBS-Parts